Marbo metallization products developed for both evaporation and sputtering applications, to give optimal chemical and physical characteristics for all basecoats and topcoats. Marbo metallization products are suitable for use on plastics, metal alloys, and glass, applied by spray, flow coating or dipping.


  • Reduced drying times;
  • Superior aesthetic finish, reduced environmental impact and lower cost when compared to galvanic processes;
  • Excellent adhesion even to difficult substrates (e.g. polypropylene);
  • Optimum protection against corrosion, abrasion, petrol, alcohol and perfume;
  • The process is free from any polluting by-products;
  • Finished coatings compatible with all types of subsequent printing methods.


  • Basecoats for pre-metallization treatment
  • Topcoats for post-metallization treatment
  • Process ancillaries

Basecoats (pre-metallization)

Products directly applied to the substrate (plastics, glass, metals), to ensure adhesion of the metallization layer and to guarantee an even mirrored finish.

  • Traditional and high solids for thermoplastics

    Heat curing products, single and two component, which ensure adhesion on plastic substrates such as ABS, Polystyrene, SAN etc. and specifically on Polypropylene guaranteeing a highly aesthetic finish;

  • High solids for metal alloys

    Products designed to ensure the adhesion to metal substrates.

  • UV-cure

    UV polymerization cures the coating in seconds, whilst reducing solvent use.

  • Special Application: flow coating and dipping

    Special coatings designed for flow coating and dipping.

Topcoats (post-metallization

Products applied directly to the metallization layer in order to protect and decorate it.
These products in addition to ensuring high chemical and physical resistance (scratch and alcohol resistant properties etc) can be coloured in an infinite number of shades and tones and /or matted, such that it is possible to obtain an unlimited number of effects.

  • Traditional and high solid abrasion resistant

    Heat curing products with guaranteed high abrasion resistance even when applied thinly.

  • Alcohol and essences resistant for cosmetics packaging

    Single and two-component finishes with high chemical resistance. They will withstand the attack of perfumes, essences, and products with high solvent content while maintaining a high resistance to abrasion.

  • Water based

    Range of products which are solvent free and eco-friendly.

  • UV-cure

    UV polymerization cures the coating in seconds, with reduced solvent use, whilst retaining the highest recorded values ​​of physical and chemical resistance.


  • Oil for high vacuum diffusion pumps

    These products enhance the efficiency of the metallization vacuum pumps. They derive the highest vacuum values ​​in the shortest time whilst extending the machines maintenance periods.

  • Concentrated soluble dyes to be added in protective coatings

    Soluble dyes that create colours and effects across the entire visible spectrum.

  • Matting agents for special effects

  • Products applied directly to the polypropylene substrate to promote adhesion of the base coat.

  • Specific diluents

    Large range of thinners that will maintain optimum coating properties to accommodate varying working or application parameters.


  • Packaging for cosmetics;
  • Car and motorcycle accessories;
  • Door Furniture;
  • Designer items;
  • Shop fittings;
  • COrnaments and glass bottles with high added value;
  • Furniture components;
  • Jewelery;
  • Christmas decorations;
  • Toys

Spruzzini doccia
Tondini circolari
Fari auto